Ped-Air: A Simulator for Loading, Unloading, and Evacuating Aircraft

AbstractWe present Ped-Air, a pedestrian simulation system to model the loading, unloading, and evacuation of commercial aircraft. We address the challenge of simulating passenger movement in constrained spaces (e.g., aisles and rows), along with complex, coordinating behaviors between the passengers. Ped-Air models different categories of passengers and flight crew, capturing their unique behaviors and complex interactions. We exhibit Ped-Airs capabilities by simulating passenger movements on two representative aircraft: a single-aisle Boeing 737, and a double-aisle Boeing 777. We are able to simulate the following behaviors: stress, luggage placement, flight staff assisting passengers, obstructed exits for evacuation

Spin-state studies with XES and RIXS: From static to ultrafast

We report on extending hard X-ray emission spectroscopy (XES) along with resonant inelastic X-ray scattering (RIXS) to study ultrafast phenomena in a pump-probe scheme at MHz repetition rates. The investigated systems include low-spin (LS) Fe-II complex compounds, where optical pulses induce a spin-state transition to their (sub)nanosecond-lived high-spin (HS) state. Time-resolved XES clearly reflects the spin-state variations with very high signal-to-noise ratio, in agreement with HS-LS difference spectra measured at thermal spin crossover, and reference HS-LS systems in static experiments, next to multiplet calculations. The 1s2p RIXS, measured at the Fe Is pre-edge region, shows variations after laser excitation, which are consistent with the formation of the HS state. Our results demonstrate that X-ray spectroscopy experiments with overall rather weak signals, such as RIXS, can now be reliably exploited to study chemical and physical transformations on ultrafast time scales. (C) 2012 Elsevier B.V. All rights reserved

Semi-Automated Image Analysis for the Assessment of Megafaunal Densities at the Arctic Deep-Sea Observatory HAUSGARTEN

Megafauna play an important role in benthic ecosystem function and are sensitive indicators of environmental change. Non-invasive monitoring of benthic communities can be accomplished by seafloor imaging. However, manual quantification of megafauna in images is labor-intensive and therefore, this organism size class is often neglected in ecosystem studies. Automated image analysis has been proposed as a possible approach to such analysis, but the heterogeneity of megafaunal communities poses a non-trivial challenge for such automated techniques. Here, the potential of a generalized object detection architecture, referred to as iSIS (intelligent Screening of underwater Image Sequences), for the quantification of a heterogenous group of megafauna taxa is investigated. The iSIS system is tuned for a particular image sequence (i.e. a transect) using a small subset of the images, in which megafauna taxa positions were previously marked by an expert. To investigate the potential of iSIS and compare its results with those obtained from human experts, a group of eight different taxa from one camera transect of seafloor images taken at the Arctic deep-sea observatory HAUSGARTEN is used. The results show that inter- and intra-observer agreements of human experts exhibit considerable variation between the species, with a similar degree of variation apparent in the automatically derived results obtained by iSIS. Whilst some taxa (e. g. Bathycrinus stalks, Kolga hyalina, small white sea anemone) were well detected by iSIS (i. e. overall Sensitivity: 87%, overall Positive Predictive Value: 67%), some taxa such as the small sea cucumber Elpidia heckeri remain challenging, for both human observers and iSIS

Semi-Automated Image Analysis for the Assessment of Megafaunal Densities at the Arctic Deep-Sea Observatory HAUSGARTEN

Megafauna play an important role in benthic ecosystem function and are sensitive indicators of environmental change. Non-invasive monitoring of benthic communities can be accomplished by seafloor imaging. However, manual quantification of megafauna in images is labor-intensive and therefore, this organism size class is often neglected in ecosystem studies. Automated image analysis has been proposed as a possible approach to such analysis, but the heterogeneity of megafaunal communities poses a non-trivial challenge for such automated techniques. Here, the potential of a generalized object detection architecture, referred to as iSIS (intelligent Screening of underwater Image Sequences), for the quantification of a heterogenous group of megafauna taxa is investigated. The iSIS system is tuned for a particular image sequence (i.e. a transect) using a small subset of the images, in which megafauna taxa positions were previously marked by an expert. To investigate the potential of iSIS and compare its results with those obtained from human experts, a group of eight different taxa from one camera transect of seafloor images taken at the Arctic deep-sea observatory HAUSGARTEN is used. The results show that inter- and intra-observer agreements of human experts exhibit considerable variation between the species, with a similar degree of variation apparent in the automatically derived results obtained by iSIS. Whilst some taxa (e. g. Bathycrinus stalks, Kolga hyalina, small white sea anemone) were well detected by iSIS (i. e. overall Sensitivity: 87%, overall Positive Predictive Value: 67%), some taxa such as the small sea cucumber Elpidia heckeri remain challenging, for both human observers and iSIS

Ancient nuclear genomes enable repatriation of Indigenous human remains.

After European colonization, the ancestral remains of Indigenous people were often collected for scientific research or display in museum collections. For many decades, Indigenous people, including Native Americans and Aboriginal Australians, have fought for their return. However, many of these remains have no recorded provenance, making their repatriation very difficult or impossible. To determine whether DNA-based methods could resolve this important problem, we sequenced 10 nuclear genomes and 27 mitogenomes from ancient pre-European Aboriginal Australians (up to 1540 years before the present) of known provenance and compared them to 100 high-coverage contemporary Aboriginal Australian genomes, also of known provenance. We report substantial ancient population structure showing strong genetic affinities between ancient and contemporary Aboriginal Australian individuals from the same geographic location. Our findings demonstrate the feasibility of successfully identifying the origins of unprovenanced ancestral remains using genomic methods

Multiple novel prostate cancer susceptibility signals identified by fine-mapping of known risk loci among Europeans

Genome-wide association studies (GWAS) have identified numerous common prostate cancer (PrCa) susceptibility loci. We have fine-mapped 64 GWAS regions known at the conclusion of the iCOGS study using large-scale genotyping and imputation in 25 723 PrCa cases and 26 274 controls of European ancestry. We detected evidence for multiple independent signals at 16 regions, 12 of which contained additional newly identified significant associations. A single signal comprising a spectrum of correlated variation was observed at 39 regions; 35 of which are now described by a novel more significantly associated lead SNP, while the originally reported variant remained as the lead SNP only in 4 regions. We also confirmed two association signals in Europeans that had been previously reported only in East-Asian GWAS. Based on statistical evidence and linkage disequilibrium (LD) structure, we have curated and narrowed down the list of the most likely candidate causal variants for each region. Functional annotation using data from ENCODE filtered for PrCa cell lines and eQTL analysis demonstrated significant enrichment for overlap with bio-features within this set. By incorporating the novel risk variants identified here alongside the refined data for existing association signals, we estimate that these loci now explain ∼38.9% of the familial relative risk of PrCa, an 8.9% improvement over the previously reported GWAS tag SNPs. This suggests that a significant fraction of the heritability of PrCa may have been hidden during the discovery phase of GWAS, in particular due to the presence of multiple independent signals within the same regio

Stress analysis and design suggestions for multi-loop carbon roving rosettes to reinforce bolt-loaded open-hole laminates

The potential of mechanical joints in monolithic carbon fiber reinforced plastics (CFRP) laminates is limited by the poor local bearing response under bolt loads. To improve the mechanical performance of bolt-loaded open holes, often metallic inserts or fiber reinforcements like Advanced and Tailored Fiber Placement (AFP, TFP) are used. In this work, an alternative to AFP and TFP is investigated, where winded carbon rovings are twisted around the bolt and work without sewing. These multi-loop rovings consist of turns around the hole and free slings in the design area around the hole. Based on previously conducted experimental and numerical studies, published in Botzkowski et al. (2016), a model generator has been developed to build up three-dimensional finite element (FE) models on mesoscopic level. The model generator is capable of considering variable design parameters of the multi-loop rosette as well as manufacturing effects like changes in cross sections of the rovings. The applied material models have been parametrized by experimental tests at single-loops and non-reinforced reference laminates. By applying the model generator, various multi-Loop configurations with varying number of turns, number of loops, loop orientations and loop lengths are generated and evaluated in terms of their stress behavior and load bearing capacity. Finally, design proposals for winded multi-loop roving rosettes are derived

Experimental and numerical analysis of bolt-loaded open-hole laminates reinforced by winded carbon rovings

Quasistatic and oscillating forces transferred into carbon composite parts by bolts are limited by poor bearing stresses. There are various approaches to reinforce open holes, for example by the use of integrated metal sheets or by complexly stitched rovings. In the present paper, the influence of a winded roving applied to a bolt-loaded open-hole laminate is investigated in terms of the structural responses. As basis of this research, a non-reinforced open-hole laminate as well as single winded carbon loops are regarded as reference samples. Both reference-laminate and reference single-loops are tested experimentally under bolt-loading to obtain load–displacement results, which are used to set simulation Parameters and to validate corresponding finite element (FE) models. For numerical investigation, threedimensional finite volume element models are generated to describe the carbon loops considering cross sections as well as ondulations of the fibre rovings. The influence of manufacturing effects on the roving’s cross sections is considered and assessed. Based on these findings, an idealised model of the multi-loop reinforced open-hole laminate is set up. Subsequently, the accuracy of this analysis method is validated by experimental tests of a laminate reinforced by three loops

Pushing up the magnetisation values for iron oxide nanoparticles via zinc doping: X-ray studies on the particle's sub-nano structure of different synthesis routes

The maximum magnetisation (saturation magnetisation) obtainable for iron oxide nanoparticles can be increased by doping the nanocrystals with non-magnetic elements such as zinc. Herein, we closely study how only slightly different synthesis approaches towards such doped nanoparticles strongly influence the resulting sub-nano/atomic structure. We compare two co-precipitation approaches, where we only vary the base (NaOH versus NH3), and a thermal decomposition route. These methods are the most commonly applied ones for synthesising doped iron oxide nanoparticles. The measurable magnetisation change upon zinc doping is about the same for all systems. However, the sub-nano structure, which we studied with Mössbauer and X-ray absorption near edge spectroscopy, differs tremendously. We found evidence that a much more complex picture has to be drawn regarding what happens upon Zn doping compared to what textbooks tell us about the mechanism. Our work demonstrates that it is crucial to study the obtained structures very precisely when “playing” with the atomic order in iron oxide nanocrystals